Cookiename	Beispielinhalt	Ablaufzeit
_ga_*	deleted	730 Tage
_ga	GA1.1.8643343795.1726666186	730 Tage

ENGINELink

SKU: 30970
Manufacturers: DIGITAL YACHT SARL

Monitor your engine data on a tablet, smartphone, PC, MAC or iPad with Digital Yacht's ENGINELink NMEA 2000 Wifi Server

309,99 €

incl. 19% VAT , plus

Available immediately
Delivery time: ca. 3 weeks (DE - int. shipments may differ)

Purchase covered by PayPal's buyer protection

Safe Transaction

Returnable within 30 days.

Description
Manuals

Device description

ENGINELink allows viewing of the boat's engine data, including RPM, temperature, pressure and battery voltage. This data is displayed via a web interface integrated into the device in the form of a dashboard. Thus, it is not necessary to use a custom application.

iOS and Android devices can simultaneously display navigation data on a navigation app and engine data on the integrated web interface. So you can have your favorite map app open alongside the engine data.

Setting up and installing the device is easy. You just need to connect to the NMEA 2000 network and the ENGINELink will be self-powered over the NMEA 2000 network. It creates a secure, password-protected local Wi-Fi network that up to 7 devices can connect to simultaneously. UDP and TCP/IP protocols are also supported to ensure compatibility with third-party applications.

Most modern inboard and outboard engines have a NMEA 2000 interface or can be retrofitted as an accessory. ENGINELink has predefined display pages for the most popular manufacturers such as Honda, Yamaha, Yanmar, Volvo and even an electric motor optimized page with a range calculator.

Both single and dual engine systems are currently supported, and ENGINELink works with any engine that has a NMEA 2000 interface. If the boat is equipped with NMEA 2000 compliant hydraulic cylinders or stabilizers, their status will also be displayed on the cockpit.

Configuration

You can configure the ENGINELink via its own web interface. Simply open your web browser, enter the ENGINELink's IP address and you will be taken to the attractive dashboard to view your engine's data. So no additional programming software or app is required.

By default, EngineLink is configured for a single combustion engine, but can also be set up to operate with dual engines and/or compatible electric motors. Additionally, the Gauges page is fully editable, allowing you to change, hide, or add gauges depending on the engine data on your NMEA 2000 network.

You can change the network name and password or even merge the Wi-Fi with an existing on-board Wi-Fi network and also view the received NMEA data in the web browser to make troubleshooting easier.

Properties

WLAN server for NMEA 2000 networks with integrated display of engine data.
Compatible with outboard motors with NMEA 2000 interface.
Secure, password-protected WiFi network or connection to the boat's existing WiFi network.
Display of the most common parameters such as speed, battery voltage, temperature, pressure, fuel, etc.
Dedicated display page for electric motors
Support for multiple engines.
Connect the device to your NMEA 2000 network and connect your tablets, PCs to the device's WiFi - any device with a browser can display the web interface.
Streams real-time AIS and GPS data to other apps such as Navionics for accurate boat GPS data as well as AIS overlays.
Easy to update even after adding engine parameters.
Possibility of recording data to carry out diagnoses.