How many components do I need for a bed?
First calculate the area of the lying surface. For one square meter you need about 45 panels, about 90 springs and about 40 connectors as well as an unlocking tool. To prevent the finished ModukoFlex spring system from slipping, you need a fastening point at each corner and at a distance of approx. 50 cm. Example:
- Your bed is 2 meters long and 0.75 m wide.
- 2 x 0.75 = 1.5 m²
- Number of plates: 1.5 x 45 = 68 pieces, rounded up to full 10s = 70 plates
- Number of springs: 1.5 x 90 = 135 pieces, rounded up to a full 20 = 140 springs
- Number of connectors: 1.5 x 40 = 60 pieces, rounded up to a full 20 = 60 connectors
- Attachment points: 4 corners + 3 x 2 on the sides every 50cm + 1 x 2 top and bottom center = 12 pieces, rounded up to a full 5 = 15 attachment points
- Unlocking tool: 1 piece
Please note that more springs can be used in heavily stressed areas, such as the hips or in people with a slightly larger build. You can reorder and upgrade springs at any time or order about 25% more springs.
Not sure how many components you need? Then simply book our calculation service
You can find further assembly instructions in our answer area under Products / ModuloFlex - beds, spring and ventilation system
and in the Assembly instructions
Sleeping comfort - immediately noticeable
ModuloFlex significantly improves the sleeping comfort in boats, caravans, mobile homes and truck cabins. Multi-Plate Technology enables a stable point-to-point connection. This guarantees permanent movement adjustment and optimal support during sleep. This system provides an even surface with no hard point sleeping surface in the center of the twin bunks.
You can simply increase the number of springs in order to achieve an optimal fit without sagging in areas that are particularly stressed, such as at pelvic height or with slightly heavier people. ModuloFlex allows up to two additional springs per connection.
ventilation and hygiene - fights moisture
ModuloFlex is an innovative bed system that creates a ventilated space between the mattress and its base. This ventilation prevents moisture and mold formation and protects the upholstery. All materials that make up ModuloFlex are non-magnetic and rustproof.
Adaptable design - adaptable to any bed shape
Thanks to its multiple attachment positions, ModuloFlex can be adapted to any shape and size of lying surface.
Easy to install
A simple clipping operation without any special tools enables the assembly of the various elements.
Access under the bed - tanks, storage space, equipment
To access under the bed, simply permanently remove the hangers and ties around the hatch. Fasten the ModuloFlex to the cover of the opening with the fastening piece and thus lift part of the ModuloFlex when opening.
Fixing - no slipping
Fix ModuloFlex at the edges with fixing pieces. A distance of approx. 50 cm is sufficient