Cookiename	Beispielinhalt	Ablaufzeit
_ga_*	deleted	730 Tage
_ga	GA1.1.8643343795.1726666186	730 Tage

Seajet Peller Clean Propeller protection

Seajet Peller Clean Propeller protection

SKU: 60116
Manufacturers: Seajet

Seajet Peller Clean: Biocide-free antifouling treatment for propellers and drives. Prevents fouling and increases performance. Order now at a great price!

amound

from

114,99 €

incl. 19% VAT , plus

Available immediately

Purchase covered by PayPal's buyer protection

Safe Transaction

Returnable within 30 days.

This item has variations. Please select the requested variation.

Description

Seajet Peller Clean Antifouling Kit – Maximum Performance for Your Drive

Protect your propeller and sterndrive effectively from fouling! The Seajet Peller Clean Kit is an innovative, biocide-free fouling-release coating specially formulated to minimize the adhesion of algae and barnacles. Its extremely smooth surface allows you to glide more efficiently through the water, saving fuel and protecting your valuable equipment. Protect your propeller and sterndrive from fouling.

Why Seajet Peller Clean?

Biocide-free & Environmentally Friendly: Effective protection without harmful toxins – ideal for fresh and salt water.
Foul-Release Technology: Fouling barely adheres and is easily removed while underway or by gentle rinsing.
Complete Set: Contains everything you need for professional application (primer and clear topcoat).
Versatile: Excellent for steel, aluminum, and bronze propellers, as well as for outboard motors (up to 150 hp).

Application Instructions for Optimal Results:

Preparation: Thoroughly remove all old antifouling residue and dirt. Sand the surface smooth and then degrease it carefully.
Primer: Mix the 2K primer (Primer Base & Hardener) for approximately 5 minutes. Apply two coats with a brush, leaving a 1-hour gap between coats.
Topcoat: After approximately 1 hour of drying time for the final coat of primer, the Clear Coat (topcoat) can be applied. Apply two to three coats, leaving a 2-hour gap between coats.
Drying: Allow the system to dry for at least 8 hours (at approximately 15°C) after the final coat before launching the boat.

Important note: Apply only in dry weather and at temperatures above 10°C. Always use clean brushes and wear appropriate protective clothing.

Hazard Statements

Danger

H225 Highly flammable liquid and vapor.
H226 Flammable liquid and vapor.
H304 May be fatal if swallowed and enters airways.
H314 Causes severe skin burns and eye damage.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H336 May cause drowsiness or dizziness.
H341 Suspected of causing genetic defects.
H361 Suspected of damaging fertility or the unborn child.
H373 May cause damage to organs through prolonged or repeated exposure. .
H411 Toxic to aquatic life with long-lasting effects.
H412 Harmful to aquatic life with long-lasting effects.
H351 Suspected of causing cancer.
H335 May cause respiratory irritation.
H302+H312 Harmful if swallowed or in contact with skin.

EUH statements:

EUH208 Contains 3-Aminopropyltriethoxysilane, N-(3-(Trimethoxysilyl)propyl)ethylenediamine. May produce an allergic reaction.

Safety Instructions

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P310 Immediately call a POISON CENTER/doctor/….
P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Continue rinsing.
P260 Do not breathe dust/fume/gas/mist/vapors/spray.
P308+P313 IF exposed or concerned: Get medical advice/attention.
P501 Dispose of contents/container to an approved waste disposal company.
P391 Collect spillage.
P370+P378 In case of fire: Use alcohol-resistant foam to extinguish.
P403+P235 Store in a well-ventilated place. Keep cool.

PDF

Sicherheitsdatenblatt 1

Sicherheitsdatenblatt 1

Sicherheitsdatenblatt 2

Sicherheitsdatenblatt 2

Item information	Value
Shipping weight:	0,50 kg
Content:	1,00 Pcs.
manufacturer / responsible person:	Yachticon A. Nagel GmbH, Bgm.-Bombeck-Str. 1, 22851 Norderstedt, DE, +490405113780